Aluminum Swivel Neck Thermostat Housing For Honda K-Series K20 K24
Regular price $35.04 Sale price
Shipping calculated at checkout.
- 100% Brand New
- The housing swivels, allowing you to position the water outlet angle before it is tightened down.
- The provided custom made fitting is the same size as the OEM rad hose on one end, and is threaded for an AN fitting on the other end.
- This allows you to use whatever size fitting you need for custom installations. If you want to use braided hose with AN fittings, this housing will bolt on easily and with the right adapter threaded in, you’ll be all set.
- The swivel neck comes pre-assembled with a quality thermostat (180 deg °F) which is held in place with a C-clip which is known to withstand high pressures.
- Adjustable, set the rad hose at any angle.
- Fan switch port for engine swaps.
- Easily deletes heater core hoses on race cars.
- Threaded water outlet for custom setups.
- The kit uses a standard size thermostat that you can easily replace with anything in the (160-195 °F) degree range.
- Professional Installation is Highly Recommended
- No Instruction Included
- For K Series K20 K20a K20a2 K20z1 K24A K24Z.(Like RSX ,TSX , Accord , Civic , CR-V.)
- (Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle to match your needs.)
- 1x Swivel Thermostat Housing
- 1x -16AN Hose Adapter
- 3x Bolts
- As The Pictures Shown